Files

Print settings

For the recommended settings when printing our parts, please click here. Deviating from these settings may result in lower quality prints, loss of features, and improper alignment.

File names starting with 'a' can be printed in an accent color.

Stepper Towers

Estimated filament used: ~66g

Image	File Name	Qty.	Plastic
	a_Stepper_Mount_Bottom_Left.stl	1x	ABS/ASA
	a_Stepper_Mount_Bottom_Right.stl	1x	ABS/ASA
	a_Stepper_Mount_Top_Left.stl	1x	ABS/ASA
	a_Stepper_Mount_Top_Right.stl	1x	ABS/ASA

XY Joints

Top Mount XY

Estimated filament used: ~44g

Image	File Name	Qty.	Plastic	Notes
	XJoint_Bottom_Left.stl	1x	ABS/ASA
	XJoint_Bottom_Right.stl	1x	ABS/ASA
	XJoint_Top_Left.stl	1x	ABS/ASA
	XJoint_Top_Right.stl	1x	ABS/ASA
	a_Flange_Spacer_pair.stl	1x	ABS/ASA
	a_XJoint_10mm_Idler_Spacers.stl	1x	ABS/ASA	Measure Parts
	a_XJoint_9mm_Idler_Spacers.stl	1x	ABS/ASA	Measure Parts
	a_XJoint_8mm_Idler_Spacers.stl	1x	ABS/ASA	Measure Parts

Only print the XJoint Idler Spacers relevant for your setup.

Front Mount XY Joints

Estimated filament used: ~44g

Front Towers

Estimated filament used: ~39g

Image	File Name	Qty.	Plastic	Notes
	a_Front_Tower_Left.stl	1x	ABS/ASA
	a_Front_Tower_Right.stl	1x	ABS/ASA
	Front_Tension_Plate_T-Nut_x2.stl	2x	ABS/ASA	More Info
	Front_Tension_Plate_Tapped_x2.stl	2x	ABS/ASA	More Info

Learn about Tapped vs T-Nut front tensioner plates here

Tools

Estimated filament used: ~11g

Image	File Name	Qty.	Plastic
	Tool_Front_Tower.stl	1x	PLA/PETG/ABS/ASA
	Tool_Front_Tower_Brass.stl	1x	PLA/PETG/ABS/ASA
	Tool_Pulley_Alignment_Left.stl	1x	PLA/PETG/ABS/ASA
	Tool_Pulley_Alignment_Right.stl	1x	PLA/PETG/ABS/ASA
	Tool_Rail_Alignment.stl	x2	PLA/PETG/ABS/ASA

Misc

Estimated filament used: ~38g

Image	File Name	Qty.	Plastic	Notes
	Rear_Splitloom_Arm.stl	1x	ABS/ASA
	Y_Endstop.stl	1x	ABS/ASA
	Pro_Only_Z_Drop_Bracket_x2.stl	2x	ABS/ASA	ONLY used for the Pro
	Plus_Only_Bed_Raiser_x4.stl	4x	ABS/ASA	ONLY Used for the Plus

Optional: Lightweight Gantry Files

Estimated filament used: ~2g

Image	File Name	Qty.	Plastic	Notes
	x_endstop_block.stl	1x	ABS/ASA	ONLY Used for the Pro
	x_endstop_block_PLUS.stl	1x	ABS/ASA	ONLY Used for the Plus

These are only applicable if the Fysetc Lightweight Gantry Is used.

Nebula Specific Parts

Estimated filament used: ~54g

Image	File Name	Qty.	Plastic	Notes
	Nebula_Left_Stepper_Bottom.stl	1x	ABS/ASA
	Nebula_Right_Stepper_Bottom.stl	1x	ABS/ASA
	Enclosure_Tension_Plate.stl	2x	ABS/ASA

Thees parts are only needed if you're doing a Mercury build using the Nebula Frame.