Files

Print settings

For the recommended settings when printing our parts, please click here. Deviating from these settings may result in lower quality prints, loss of features, and improper alignment.

Step Files

You can now download the step files for our Mercury One.1! Select the appropriate size for your 3D printer:

• Ender 5 (pro) Size - Hydra_5pro.zip

• Ender 5 Plus Size - Hydra_5Plus.zip

Simply click on the desired link and start creating your masterpiece with ease.

Z Stepper Mounts

Estimated filament used: ~95g

Image	File Name	Qty.	Plastic	Notes
	Left_Stepper_Mount.stl	1x	ABS/ASA
	Rear_Stepper_Mount.stl	1x	ABS/ASA
	Right_Stepper_Mount.stl	1x	ABS/ASA

Hydra Arms

Estimated filament used: ~125g

Image	File Name	Qty.	Plastic	Notes
	Left_Arm.stl	1x	ABS/ASA
	Rear_Arm.stl	1x	ABS/ASA
	Right_Arm.stl	1x	ABS/ASA

Mini Tanks

Estimated filament used: ~7g

Measure your magnets to find the correct file.

Minitanks have a lot of options. We've decided to split them up by magnet size.

12x5mm Magnet

Image	File Name	Qty.	Plastic	Notes
	Mini_Tank_12x5_9C.stl	3x	ABS/ASA	12x5mm Magnets
	Mini_Tank_11-7x5_9C.stl	3x	ABS/ASA	Read below

12x4mm Magnet

12x3mm Magnet

We often see that magnets arrive slightly out of spec, we have included files to try account for this.

Misc

Estimated filament used: ~21g

Image	File Name	Qty.	Plastic	Notes
	Chain_End.stl	2x	ABS/ASA	End for Cable Chain
	2020_Cable_Tie.stl	3x	ABS/ASA	Exact qty. varies
	Wago_221_Triple.stl	1x	ABS/ASA	3x 2 Port Wago
	Wago_221_Fabreeko_Heater.stl	1x	ABS/ASA	2x 2 Port, 1x 3 Port Wago