# Bill of Material
The tables contain a column named `Stores`. Click the [red text](https://docs.zerog.one/manual/build/hydra/bill_of_material#) underneath to reveal a pop-up with a list of stores. Stores that contain a checkmark have been verified and tested by either an Engineer or a trusted community member.
### Kits
We **do not** own the kits. We’re **not responsible** for these kits. **Make sure to check the included hardware**. These kits might not contain all the hardware needed.
#### All kits
| Type | Stores |
| --------- | ----------------------------------------------------------------------------------- |
| Hydra kit | [Click here](https://docs.zerog.one/manual/build/hydra/bill_of_material#hydra_kits) |
## Self sourcing
### Bolts
#### **Self sourcing bolts**
| Size | Type | Amount | Stores |
| ----- | -------------------- | ------ | ------------------------------------------------------------------------------------ |
| M3X6 | ISO 10642 / DIN 7991 | 6 | [Click here](https://docs.zerog.one/manual/build/hydra/bill_of_material#m3x6_7991) |
| M3X8 | ISO 4762 / DIN 912 | 85 | [Click here](broken://pages/Q0RxUEio22ZqY8XylQah#m3-x-8mm-shcs) |
| M3X10 | ISO 4762 / DIN 912 | 3 | [Click here](https://docs.zerog.one/manual/build/hydra/bill_of_material#m3x10_912) |
| M4X16 | ISO 4762 / DIN 912 | 3 | [Click here](https://docs.zerog.one/manual/build/hydra/bill_of_material#m4x16_912) |
| M5X8 | ISO 7380 / DIN 7380 | 4 | [Click here](https://docs.zerog.one/manual/build/hydra/bill_of_material#m5x8_7380) |
| M5X10 | ISO 4762 / DIN 912 | 18 | [Click here](https://docs.zerog.one/manual/build/hydra/bill_of_material#m5x10_912) |
### T-Nuts
| Size | Type | Amount | Stores |
| ---- | --------------------- | ------ | ----------------------------------------------------------------------------------------- |
| M3 | Roll in spring loaded | 24 | [Click here](https://docs.zerog.one/manual/build/hydra/bill_of_material#m3_rollin_tnut) |
| M5 | Roll in spring loaded | 22 | [Click here](https://docs.zerog.one/manual/build/hydra/bill_of_material#m5_rollin_tnut) |
### Extrusions
*Note: Ender 5 (Pro) and Ender 5 Plus have different sizes for parts.*
| Printer | Size | Type | Amount | Stores |
| ------------- | ----- | -------------- | ------ | ----------------------------------------------------------------------------------------- |
| Ender 5 (Pro) | 400mm | 2020 Extrusion | 1 | [Click here](https://docs.zerog.one/manual/build/hydra/bill_of_material#extrusion_2020) |
| Ender 5 Plus | 510mm | 2020 Extrusion | 1 | [Click here](https://docs.zerog.one/manual/build/hydra/bill_of_material#extrusion_2020) |
### Linear rails
*Note: Ender 5 (Pro) and Ender 5 Plus have different sizes for parts.*
| Printer | Size | Type | Amount | Stores |
| ------------- | ----- | ---------------- | ------ | -------------------------------------------------------------------------------------- |
| X | 100mm | MGN9C | 3 | [Click here](https://docs.zerog.one/manual/build/hydra/bill_of_material#MGN9C_100mm) |
| Ender 5 (Pro) | 400mm | MGN12C OR MGN12H | 3 | [Click here](https://docs.zerog.one/manual/build/hydra/bill_of_material#MGN12_400mm) |
| Ender 5 Plus | 500mm | MGN12C OR MGN12H | 3 | [Click here](https://docs.zerog.one/manual/build/hydra/bill_of_material#MGN12_500mm) |
### Leadscrew
*Note: Ender 5 (Pro) and Ender 5 Plus have different sizes for parts. Leadscrews can vary in sizes.*
Make sure to look for Leadscrews that include a circular T8 Nut with 4 holes.
| Printer | Size Range | Type | Amount | Stores |
| ------------- | ------------- | ------------- | ------ | ---------------------------------------------------------------------------------------- |
| Ender 5 (Pro) | 350mm / 370mm | TR8 Leadscrew | 3 | [Click here](https://docs.zerog.one/manual/build/hydra/bill_of_material#TR8_Leadscrew) |
| Ender 5 Plus | 450mm / 470mm | TR8 Leadscrew | 3 | [Click here](https://docs.zerog.one/manual/build/hydra/bill_of_material#TR8_Leadscrew) |
### Magnet
| Size | Type | Amount | Stores |
| ---------------- | ---------------------------------------------------- | ------ | ----------------------------------------------------------------------------------------- |
| 12x5mm or 12x4mm | 4mm hole Neodymium
Countersunk Ring Magnet
| 3 | [Click here](https://docs.zerog.one/manual/build/hydra/bill_of_material#12x5_cs_magnet) |
### Bed
| Printer | Size | Type | Amount | Stores |
| ------------- | ------------- | ----------------- | ------ | ------------------------------------------------------------------------------------- |
| Ender 5 (Pro) | 255/275mm | Bed heater | 1 | [Click here](https://docs.zerog.one/manual/build/hydra/bill_of_material#bed_heater) |
| Ender 5 Plus | 377mm | Bed heater | 1 | [Click here](https://docs.zerog.one/manual/build/hydra/bill_of_material#bed_heater) |
| Ender 5 (Pro) | 255/275mm | Aluminum bed | 1 | [Click here](https://docs.zerog.one/manual/build/hydra/bill_of_material#hydra_bed) |
| Ender 5 Plus | 377mm | Aluminum bed | 1 | [Click here](https://docs.zerog.one/manual/build/hydra/bill_of_material#hydra_bed) |
| X | Case specific | Solid State Relay | 1 | [Click here](https://docs.zerog.one/manual/build/hydra/bill_of_material#ssr) |
### Misc
| Size | Type | Amount | Stores |
| ----------------- | ------------------------------------------- | ------ | ---------------------------------------------------------------------------------------------- |
| 2020 | 2020 Corner bracket | 2 | [Click here](https://docs.zerog.one/manual/build/hydra/bill_of_material#2020_corner_bracket) |
| M3 X D5.0 X L4.0 | Heatset insert | 39 | [Click here](https://docs.zerog.one/manual/build/hydra/bill_of_material#heatset_insert) |
| M3 Washer | Normal grade A M3
Stainless Steel
| 12 | [Click here](https://docs.zerog.one/manual/build/hydra/bill_of_material#plain_m3_washer) |
| M4 X 8 X L8 | Spacer | 3 | [Click here](https://docs.zerog.one/manual/build/hydra/bill_of_material#8mm_spacers) |
| 10mm M4 | Kossel ball | 3 | [Click here](https://docs.zerog.one/manual/build/hydra/bill_of_material#m4_kossel_balls) |
| 10x11mm - 1 Meter | R18 Drag chain | 1 | [Click here](https://docs.zerog.one/manual/build/hydra/bill_of_material#10x11_drag_chain) |
| Nema17 | Stepper motor | 3 | [Click here](https://docs.zerog.one/manual/build/hydra/bill_of_material#nema17_zaxis) |
| 5mm-8mm | Shaft Coupling | 3 | [Click here](https://docs.zerog.one/manual/build/hydra/bill_of_material#stepper_coupler) |
| OPTIONAL | Oldham Coupling | 3 | [Click here](https://docs.zerog.one/manual/build/hydra/bill_of_material#oldham_coupler) |
---
# Agent Instructions: Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation dynamically by asking a question.
Perform an HTTP GET request on the current page URL with the `ask` query parameter:
```
GET https://tempdocs.zerog.one/projects/hydra/bill-of-material.md?ask=
```
The question should be specific, self-contained, and written in natural language.
The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.
Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.