LogoLogo
Discord
  • Documentation
  • Projects
  • Changelog
  • Welcome to ZeroG
  • Guides
    • Printing
      • Printing tips
      • Print settings
    • Design
  • Resources
    • Sourcing Guide
  • External Links
    • Discord
    • Github
  • FAQ
    • Mainsail
      • Mainsail Theme Setup
    • Frame
      • Blind joints, how do they work?
    • Electronics
      • Motherboards
        • Spider V3.0
        • LDO Voron Leviathan
        • BigTreeTech Kraken
        • BigTreeTech Octopus Pro
Powered by GitBook

Copyright © 2024, ZeroG. All rights reserved. ZeroG by https://zerog.one/ is licensed under a CC BY-NC-SA 4.0 International License.

On this page
  • Guidelines
  • M3 Hardware
  • M5 Hardware
  • Heatset Inserts

Was this helpful?

Edit on GitHub
Export as PDF

Guidelines

This page includes the clearances you need when printing with ABS, they have been tested for shrinkage and turn out to be the best “general” settings for everyone to print without any clearance issues.

M3 Hardware

Type
Fit
Hole
Counterbore
Depth

DIN918

Loose

3.3mm

6mm

N/A

DIN918

Tight

3.2mm

5.8mm

N/A

DIN934 (nut)

Loose

5.8mm

N/A

2.6mm

DIN934 (nut)

Tight

5.7mm

N/A

2.6mm

M5 Hardware

Type
Fit
Hole
Counterbore
Depth

DIN918

Loose

5.3mm

9mm

N/A

DIN918

Tight

5.2mm

8.8mm

N/A

DIN934 (nut)

Loose

8.3mm

N/A

4.2mm

DIN934 (nut)

Tight

8.2mm

N/A

4.2mm

Heatset Inserts

Type
Size
Hole
Counterbore
Depth

Heat set threaded inserts

M3 X D5.0 X L4.0

4.7mm

N/A

4.1mm

PreviousPrint settingsNextSourcing Guide

Last updated 5 months ago

Was this helpful?